How To Get Started
FPV Drone QuickStart
Here are the most important steps to get started:. Keep the spin-direction markers on the motors. You will need them later when installing the propellers correctly. TBS Crossfire or ExpressLRS receiver:. Connect your BNF drone to your PC through the
How to Bind your DJI O4 & O3 System Step by Step
This guide explains how to bind the DJI O4/O3 Air Unit with compatible DJI Goggles and DJI FPV Remote Controllers. Supported Flight Controller System. Betaflight 4.3.0 or later. Supported DJI Goggles and Controllers. DJI Goggles 3 + DJI FPV Remote C
ExpressLRS Binding Guide
3× Plug Method. 1. With the 3× plug method, you plug the receiver’s power in and out three times in a row. 4. The receiver will bind directly to your transmitter – without a binding phrase. Each drone can be assigned an individual binding phrase.As s
Setting up TBS Crossfire
TBS Crossfire is a long-range radio control system commonly used for FPV drones. It provides:. This guide explains how to:. Always remove all propellers before configuration or testing. TBS Crossfire uses:. Crossfire receivers require:. Incorrect set
FPV LiPo Battery Charging, Storage & Safety Guide
FPV drones commonly use Lithium Polymer (LiPo) batteries because they provide:. However, LiPo batteries require careful handling and can become dangerous if used incorrectly. Improper charging, discharging, storage, physical damage, or incorrect hand
Motor & Propeller Direction
Correct motor and propeller direction is essential for stable flight. If even one prop is installed incorrectly, the drone will not lift off or will flip immediately. In the Motors tab in Betaflight, you can see the motor layout and rotation directio