Betaflight Guides
Betaflight Factory Preset Recovery
iFlight BNF drones are delivered with tested factory Betaflight settings. In most cases, you do not need to update Betaflight firmware or change advanced settings. This guide is mainly intended for recovery if:. Do not update or flash Betaflight unle
GPS Rescue Setup Guide
GPS Rescue is a safety feature in Betaflight that can attempt to guide the drone back toward the home position if signal loss occurs. GPS Rescue is especially useful for long-range and mid-range FPV flying, but it is not a fully autonomous or guarant
Betaflight Modes Explained
Betaflight flight modes determine how your FPV drone reacts to stick inputs and stabilization systems. Choosing the correct mode is important for safe flying, learning progression, and overall flight performance. Understanding the differences between
Betaflight Basics for iFlight BNF Drones
iFlight BNF drones are delivered with a complete factory Betaflight configuration. In most cases, customers do not need to change Betaflight settings except for personal preferences such as Modes, Rates, OSD layout, or channel mapping. Changing firmw
Configure the flight controller for the CRSF (ELRS) protocol
Connect your flight controller to your computer using a USB data cable. Wait a few seconds until the flight controller is recognized by your operating system. Open the Betaflight Configurator on your computer. Click on:. ➡️ Firmware Flasher. in the l